Posted by admin | Posted in Uncategorized | Posted on 27-02-2004
Tags: bottle, bottle stopper blank, bottle stopper kits, bottle stopper supplies, bottle stopper turning, bottle stoppers, gift, stopper, wedding, wine
Bottle Stopper
 |
 Black White Ebony Bottle Stopper Blanks P5602  US $3.00
|
 5 PACK Acrylic Red Stabilized Zebra PEN BLANKS EXOTIC WOOD 2141 US $23.99
|
 Claro Walnut burl Slab 31 x 22 x 2 7 8 303 US $99.00
|
 One African BLACKWOOD Lumber15x10 Woodturning Grips US $22.95
|
 4 GABON EBONY Lumber 1x1x12 SHIPPED FREE Woodturning for Drum Sticks Magic Wands US $37.95
|
 Mandrel for Chrome Bottle Stoppers US $5.95
|
 Bottle Stopper Kits Chrome Finish 5 pieces US $14.95
|
 spalted maple bottle stopper blanks 1pc US $2.25
|
| home repair advice |
How to Make an LED Light Up Bottle
To make the LED light up bottle you will need...
A clear glass bottle, a meter or so of tinsel, a loo roll or kitchen towel tube, glitter, PVA glue, and a set of 20 LED lights. You can get these ready made from with a battery compartment from the '99p Store' on your local high street. Tech confident people could make their own from individual components. DO NOT use mains fairy lights, this is a fire hazard!
First wash out the bottle and remove all the labels. Use a nice smelling detergent to rid the bottle of any lingering odours from its previous contents. Leave the bottle to drain and dry out completely.
Take the LED lights and the Tinsel, use a small amount of selotape and stick the wire directly behind the last LED bulb (the bulb furthest away from the battery compartment) to the end of the strip of tinsel.
Twist the string of lights and the tinsel loosely together and carefully push the lights and tinsel into the bottle until the battery compartment rests on the neck of the bottle.
The loo roll or kitchen towel tube will become a fancy bottle stopper that covers the battery compartment.
Draw around the end of the tube onto a piece of card. A grocery box is great. Cut the disc out and push it into the end of the tube. Use a bit of selotape to hold it in place.
Cover the tube and end piece in PVA glue and sprinkle with glitter. Cover the cardboard completely so that it is no longer visible. Leave to dry.
Perch the battery compartment on top of the bottle and place the glitter bottle stopper over the top of it, so that it hides the batteries and part of the neck of the bottle.
About the Author
For More Article Visit :: http://www.thearticleinsiders.com/
my hot water bottle stopper is stuck?
does anyone know how to remove the stopper as it has been in the hot water bottle a while. i have tried putting boiling water over it but it still wont budge, any ideas?
Some sort of liqid lubricant, wd40!
